A variety of parts make up pool tables. The table has a multi-layered table top that is coated with billiard cloth. Some people prefer different colors of cloth to be on their pool tables. This gives you the opportunity to have a more personalized experience. It also ensures that the playing surface is smooth.
The slate is the top part of a pooltable. Slate is a heavy milled rock that is used as the surface of the table. Most pools tables are made of either 1" or 3/4" slate. If you are in the market for a new table, you may want to check for the correct size.
The rails are another vital part of a pool table. Rails are typically made of natural gum or synthetic materials. They are attached to the slate to provide support and glue. In some cases, the rail is made of solid wood. Other materials are usually plywood or fiberboard.
Cushions are used to protect the rails and keep them from getting damaged. Cushions can either be made of cloth or vulcanized Rubber. These cushions can also be used in conjunction with rails.
The top rail, which is shorter than the side rails, is attached to the top edge of the table. Side rails run along the length and width of the pool table. Cross beams can also add strength. A transitionplate is installed between rails and slate. A transition plate is used to strengthen the table.
The table's bottom rail can be found at the foot. The rail apron (horizontal timber) is used to provide support to the rails. Another support is the bed shelf. Both of these supports are made out of solid pieces of wooden. Post legs can be considered perfect legs.
Corner pockets are holes at the corners of a table. The angle at which the corner pocket entry opens is 142deg (+-1deg). The minimum opening distance for the corner pockets is 4 7/8inches and the maximum is 5 1/8inches.
The horizontal line that runs horizontally across the middle of the table is the head string. The head string's starting point is usually the second diamond in the side pockets. However, a player can draw a line on the cloth to mark the start of the head string.
The foot spot lies at the bottom of the table. When a shooter breaks from the ball, the foot spot is the place the ball will land. It is also home to the nameplate.
Be sure to inspect the slate thickness when you purchase a new pooltable. The slate should be 1" thick. Some dealers sell tables with 7/8" slate. They will be less expensive, but you won't get the exact same results as a 1 inch slate.
Your pool table cloth is an important part. Modern billiard fabric is usually made from a combination of synthetic nylon, natural wool, and synthetic polyester. Billiard felt can also be part of the cloth. Some players prefer a certain color of cloth. However, it should still be durable and smooth. To maintain the cloth's quality, you should brush it at least once per month.